Description
Features:
Articulating Legrest
The articulating legrest extends in length as it elevates, allowing the leg to extend freely and thus easing pressure on the knee.
Anti-sliding V-seating System
The V-shaped seat slopes downwards at a 20 degree angle near the backrest to help reduce forward sliding and pressure sores.
This significantly reduces shearing between the user’s back and the back of the wheelchair and the need for the attendant to reposition the user.
Hydraulic Pressure Support System
The MVP 502’s reclining system is composed of two hydraulic gas springs that provide a smooth, controlled motion. They minimize shock and stabilize the reclining speed. The attendant can lift the wheelchair user back to an upright position with greater efficiency.
Foldable Push-bar
Attached to the push handles of the wheelchair, the push-bar makes it easy to push and manoeuvre the wheelchair with just one hand and at the same time reinforces the structure of the wheelchair.
It also helps alleviate the pain and fatigue that comes from pushing a wheelchair. There is no need to detach because it folds with the wheelchair for easy storage and transportation.
Adjustable Flip-back Armrest
The armrest is pivotally connected to the backrest and follows the natural movement of the arm when the backrest reclines. You can adjust the height of the armrest by moving it up or down until you find the ideal height. No tools required. The armrest also flip-backs for easier transport, in and out of the wheelchair.
Ergonomic Headrest
The ergonomic headrest provides perfect support from lateral sides and occipital side, relieving neck and shoulder pressure. The headrest is also designed not to restrict lateral vision for the user.
Tension Adjustable Backrest and Seat
Unlike conventional wheelchairs, the backrest and seat use adjustable Velcro straps to change the tension and conform according to the wheelchair user. This helps to prevent a slouching and the hammock effect.
Pressure-relieving Seat and Back Cushion
An extra thick foam cushion that is 3-cm thick, it is comfortable and detachable for easy cleaning.
Foldable Backrest and Frame
Extremely compact once folded for easy storage and transportation.
Crash Test Approved
The MVP 502 is approved for transportation in accordance with ISO 7176-19. This means it is suitable to be used as a seat in a motor vehicle for transportation.
Available Colour:
Black
Specification:
| Product Model |
MVP 502 (KM-5000.2) |
| Nominal seat width (in) |
15 |
16 |
17 |
18 |
18 |
20 |
| Nominal seat depth (in) |
16 |
16 |
16 |
16 |
18 |
18 |
| Caster x Rear wheel size (in) |
7 x 22 |
| Maximum user weight (kg) |
115 |
| Overall length with legrest (mm) |
1190 |
1190 |
1190 |
1190 |
1225 |
1225 |
| Overall width (mm) |
580 |
610 |
640 |
665 |
665 |
730 |
| Overall height (mm) |
840 / 1350 (with headrest) |
| Folded length (mm) |
870 |
870 |
870 |
870 |
905 |
905 |
| Folded width (mm) |
360 |
360 |
360 |
360 |
360 |
360 |
| Folded height (mm) |
770 |
770 |
770 |
770 |
770 |
770 |
| Total mass (kg) |
21.9 |
21.9 |
22.0 |
22.3 |
22.5 |
22.9 |
| Mass of the heaviest part (kg) |
16.8 |
16.8 |
16.9 |
17.0 |
17.2 |
17.6 |
| Handrim diameter (mm) |
480 |
480 |
480 |
480 |
480 |
480 |
| Horizontal location of axle (mm) |
90 |
90 |
90 |
90 |
100 |
100 |
| Minimum turning radius (mm) |
935 |
940 |
945 |
950 |
1030 |
1040 |
Minimum turning radius
without user (mm) |
860 |
865 |
875 |
885 |
970 |
980 |
| Pivot width (mm) |
1340 |
1345 |
1345 |
1345 |
1390 |
1420 |
| Static stability downhill (X°) |
27 |
| Static stability uphill (X°) |
15 |
Static stability uphill with
anti-tippers (X°) |
28 |
| Static stability sideways (X°) |
18 |
| Seat plane angle (X°) |
7 |
| Effective seat depth (mm) |
400 |
400 |
400 |
400 |
450 |
450 |
| Nominal seat depth (mm) |
420 |
420 |
420 |
420 |
470 |
470 |
| Effective seat width (mm) |
430 |
450 |
480 |
505 |
505 |
555 |
| Seat surface height at front edge (mm) |
520 |
520 |
520 |
520 |
520 |
520 |
| Backrest angle (X°) |
13 ~ 64 |
| Seat to backrest angle (X°) |
94 ~ 147 |
| Backrest height (mm) |
490 |
490 |
490 |
490 |
490 |
490 |
| Headrest height above seat (mm) |
660 ~ 760 |
660 ~ 760 |
660 ~ 760 |
| Leg to seat angle (X°) |
100 ~ 160 |
| Footrest to seat distance (mm) |
410 ~ 485 |
410 ~ 485 |
410 ~ 485 |
| Armrest to seat distance (mm) |
260 ~ 335 |
260 ~ 335 |
260 ~ 335 |
Front location of armrest structure
(mm) |
340 |
340 |
340 |
340 |
340 |
340 |
Options
Elevating Legrest, Stump Support, Tension Back
